The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.
Features
- Ceramic shaft and radial bearings.
- Carbon axial bearing.
- Stainless steel rotor can and bearing plate.
- Corrosion-resistant impeller, Composite.
Technical
|
| Speed Number |
3 |
| Max flow |
17.2 US gpm |
| Head max |
19.36 ft |
Materials
|
| Pump housing |
Cast iron |
| Pump housing |
EN-JL1030 |
| Pump housing |
ASTM 30 B |
| Impeller |
Composite, PES |
Installation
|
| Maximum ambient temperature |
104 °F |
| Ambient max at 176°F liquid |
176 °F |
| Maximum operating pressure |
145 psi |
| Flange standard |
USA Oval |
| Type of connection |
C.I. Flange |
| Pipe connection |
2 - Bolt Flange |
| Pressure stage |
10 |
| Port-to-port length |
6 1/2 in |
Electrical data
|
| C run |
10 µF |
| Power input in speed 1 |
60 W |
| Power input in speed 2 |
80 W |
| Max. power input |
87 W |
| Rated power - P2 |
0.04 HP |
| Main frequency |
60 Hz |
| Rated voltage |
1 x 115 V |
| Current in speed 1 |
0.55 A |
| Current in speed 2 |
0.66 A |
| Current in speed 3 |
0.75 A |
| Capacitor size - run |
10 µF/180 V |
| Number of poles |
2 |
| Insulation class (IEC 85) |
F |
| Motor protection |
CONTACT |
| Thermal protec |
internal |
Liquid
|
| Pumped liquid |
Water |
| Liquid temperature range |
35.6 .. 230 °F |
| Liquid temperature during operation |
140 °F |
| Density |
61.35 lb/ft³ |
