10,000 Watt Modified Sine Power Inverter 12vDC to 120vAC

SKU:
PWRINV10KW12V
$1,495.00
(No reviews yet)
Width:
21.00 (in)
Height:
8.00 (in)
Depth:
8.00 (in)
Current Stock:

Features

  • 10000W max continuous power
  • Modified sine wave with Pulse Width Modulation technology (soft start)
  • Volt meter on front panel to monitor your battery voltage
  • Amp meter on front panel to monitor your current use (rate at which battery is drained)
  • Over Temperature LED indicator
  • Over Load LED indicator
  • AC direct connect terminal block
  • On/off switch
  • Over Temperature protection
  • Over Load protection
  • Single cooling fan thermally controlled
  • Internally fuse protected
  • AC output short circuit protection
  • Auto reset on most fault conditions
  • Aluminum case for optimal cooling
  • Pre-wired for remote on/off switch
  • Pre-slotted mounting plate
  • Instruction manual
  • Free 1 year tech support
  • 1 Year Warranty Parts and Labor

 

 
Specifications:

  • Continuous output power: 10000 Watts
  • Surge power capability (peak power): 20000 Watts
  • dc input / operating voltage: 10 to 16 Volts
  • Output voltage: 120 Volts ac +/- 10%
  • Output wave form: modified sine wave with phase correction
  • Output frequency: 60 Hz +/- 1 Hz
  • Battery low voltage alarm: 10.5 +/- 0.5 Volts
  • Battery low voltage shutdown: 10.0 +/- 0.5 Volts
  • No load current: < 1.8 DC amps
  • Full load efficiency: 90%
  • 1/3 load efficiency: 95%
  • No load minimum operating temperature: 30ºF
  • Full load maximum operating temperature: 140ºF (automatic shutdown)
  • AC Output Socket Type: quadruple Type 2 -3 prong
  • High input voltage protection: 15V-17V
  • Low input voltage shutdown: 10V Internal fuse protection
  • Product size (L x W x H): 21 3/8 x 7 7/8 x 6 inches
  • Weight: unit 23.1 lbs. boxed 25 lbs.
  • UL maximum recommended per outlet 1500W
  • This inverter requires 2 sets of 4/0 AWT cable if you are going to run at 10000 watts.

 

 Manual